Need help?Do you have a question about the Advantech Adam-4018 and is the answer not in the manual?
Explains the fundamental steps for configuring and connecting ADAM modules.
Describes the features and specifications of various ADAM analog input modules.
Details the ADAM-4016 module, its strain gauge input, and digital outputs.
Covers specifications for 8-channel analog input modules including data loggers.
Explains the ADAM-4019 universal module integrating various analog inputs.
Details the ADAM-4021 analog output module's capabilities and configuration.
Describes various digital input/output modules, including isolated and multi-channel options.
Covers the specifications for ADAM relay output modules (Form A and Form C).
Details the ADAM-4080/4080D counter/frequency input modules, including filters and thresholds.
Defines the general syntax and format for all ADAM module commands.
Lists commands for controlling analog input modules.
Details the specific command syntax and parameters for analog input modules.
Details commands for digital I/O, alarm, and event management.
Explains the process for calibrating analog input modules using software and voltage sources.
Details the procedure for calibrating ADAM-4013 analog input modules using resistance.
Describes the method for calibrating analog output modules, typically using current or voltage values.
Provides detailed technical specifications for the ADAM-4011 module.
Introduces the ADAM-4000 utility software and its capabilities.
Explains how to use the setup options within the utility software to configure modules.
Details how to perform module calibration using the ADAM utility software.
Introduces the utility software for the ADAM-4018M, highlighting additional memory function settings.
To Next Page
General