Advantech Adam - 4055

User Manual
ADAM 4000 Series
Data Acquisition Modules

Advantech Adam - 4055 Specifications

General

Brand	Advantech
Model	Adam - 4055
Category	Other
Language	English

Summary

ADAM 4000 Series User Manual

Chapter 1 Introduction

Chapter 2 Installation Guideline

2.1 System Requirements to Set up an ADAM Network

Details the necessary hardware and software components for setting up an ADAM network.

2.2 Basic Configuration and Hook-up

Describes the default factory settings and the basic process for configuring ADAM modules.

2.5 Programming Example

Demonstrates a Visual Basic 6.0 programming example for reading temperature from an ADAM-4011 module.

Chapter 3 IO Modules

3.2 ADAM-40114011 D Thermocouple Input Modules

Describes the features and specifications of ADAM-4011 and ADAM-4011D thermocouple input modules.

3.3 ADAM-4012 Analog Input Module

Describes the ADAM-4012 analog input module, its digital I/O, event counting, and alarm signaling features.

3.4 ADAM-4013 RTD Input Module

Details the ADAM-4013 RTD input module, its specifications, and input types.

3.5 ADAM-4015 6-channel RTD Input Module

Details the ADAM-4015 module for temperature measurement, including its broken wire detection function.

3.6 ADAM-4015 T 6-channel Thermistor Input Module

Describes the ADAM-4015T module for temperature measurement using thermistors, including its broken wire detection.

3.7 ADAM-4016 Analog InputOutput Module

Describes the ADAM-4016 module for strain gauge measurements, including its A/D conversion and D/A conversion functions.

3.8 ADAM-40174017+40184018 M4018+ 8-channel Analog Input Modules

Covers specifications for ADAM-4017, 4017+, 4018, 4018M, and 4018+ modules.

3.9 ADAM-4019+ 8-channel Universal Analog Input Module

Describes the ADAM-4019+ module, its integration capabilities, and burnt-out detection.

3.10 ADAM-4021 Analog Output Module

Describes the ADAM-4021 analog output module, its microprocessor-controlled D/A converter, and slew rate feature.

3.11 ADAM-4024 4-channel Analog Output Module

Details the ADAM-4024 module with mixed I/O, multi-range AO support, and slew rate control.

3.12 ADAM-4050 Digital IO Module

Describes the ADAM-4050 module's digital input and output channels and their capabilities.

3.13 ADAM-4051 16-channel Isolated Digital Input Module

3.14 ADAM-4052 Isolated Digital Input Module

3.15 ADAM-4053 16-channel Digital Input Module

3.16 ADAM-4055 16-channel Isolated Digital IO Module

3.17 ADAM-4056 S 12-channel Sink Type Isolated Digital Output Module

3.18 ADAM-4056 SO 12-channel Source Type Isolated Digital Output Module

3.19 ADAM-40604068 Relay Output Module

3.20 ADAM-4069 8-channel Relay Output Module

3.21 ADAM-40804080 D CounterFrequency Input Modules

Chapter 4 Command Set

Chapter 5 Analog Input Module Commands

5.1 Analog Input Common Command Set

Lists common commands applicable to various ADAM analog input modules.

5.2 Analog Input Data Logger Command Set

Chapter 6 Analog Output Module Commands

6.1 Analog Output Module Command for ADAM-4021

6.2 Analog Output Module Command for ADAM-4024

Chapter 7 IO, Relay & CounterFrequency

7.1 Digital IO and Relay Output Module Command

7.2 CounterFrequency Module Command

7.2.3 Digital Filter and Programmable Threshold Command Set

Lists commands for configuring digital filters and programmable thresholds.

Chapter 8 Calibration

8.1 Analog Input Module Calibration

Guides users through calibrating analog input modules using software or automatic calibration.

8.2 Analog Input Resistance Calibration

Details the steps for analog input resistance calibration, specifically for the ADAM-4013 module.

8.3 Analog Input Thermistor Module Calibration

Provides calibration steps for the ADAM-4015T thermistor module, including lead wire effect compensation.

8.4 Analog Output Calibration

Explains the process for calibrating analog output modules, including current and voltage outputs.

Appendix A Technical Specifications

Appendix B Data Formats and IO Ranges

Appendix C Technical Diagrams

Appendix D Utility Software

D.1 ADAM-4000 Utility Software

Details the capabilities of the ADAM-4000 utility software, including configuration and calibration.

D.2 The Procedure for ADAM-4000 Series Installation Guide

Provides a step-by-step guide for installing and configuring ADAM-4000 modules.

Appendix E RS-485 Network

E.1 RS-485 Network

E.2 Basic Network Layout

Appendix F Using the Checksum Feature

F.1 Checksum EnableDisable

Details how to enable or disable the checksum feature for detecting communication errors.

Appendix G IO Modbus Mapping Table

G.1 ADAM-4000 IO Modbus Mapping Table

Appendix H Changing to Modbus Protocol

H.1 Changing Configuration to Modbus Protocol

Guides on configuring ADAM-4000 modules for Modbus protocol from the default ADAM ASCII protocol.