Advantech Adam - 4069

User Manual
ADAM 4000 Series
Data Acquisition Modules

Advantech Adam - 4069 Specifications

General

Brand	Advantech
Model	Adam - 4069
Category	Other
Language	English

Summary

Installation Guideline

System Requirements to Set up an ADAM Network

Lists necessary hardware and software components for setting up an ADAM network.

IO Modules

ADAM-40114011 D Thermocouple Input Modules

Describes the features and functions of the ADAM-4011/4011D thermocouple input modules.

Command Set

Command Syntax

Details the general format and characters used for issuing commands to ADAM modules.

Analog Input Module Commands

Analog Input Common Command Set

Lists common commands applicable to various analog input modules.

Analog Output Module Commands

IO, Relay & CounterFrequency Modules

Digital IO and Relay Output Module Commands

Lists commands for controlling digital I/O and relay output modules.

CounterFrequency Module Command

Lists commands for configuring and operating counter/frequency modules.

Calibration

Analog Input Module Calibration

Explains how to calibrate analog input modules using software and voltage sources.

Analog Input Resistance Calibration

Analog Input Thermistor Module Calibration

Analog Output Calibration

Outlines the procedure for calibrating ADAM-4021/4024 analog output modules using mA and voltage values.

Technical Specifications

Utility Software

ADAM-4000 Utility Software

Introduces the utility software and its capabilities for module configuration, calibration, and data access.

Changing to Modbus Protocol

Changing Configuration to Modbus Protocol

Provides step-by-step instructions for configuring ADAM-4000 modules from ASCII to Modbus protocol.