Advantech Adam -4080

User Manual
ADAM 4000 Series
Data Acquisition Modules

Advantech Adam -4080 Specifications

General

Model	ADAM-4080
Input Channels	8
Isolation	3000 VDC
Communication	RS-485
Protocol	Modbus RTU
Weight	200 g
Sampling Rate	10 Hz per channel
Accuracy	±0.1% FS
Power Supply	10-30 VDC
Operating Temperature	-25°C to +75°C
Storage Temperature	-40 to 85 °C
Humidity	10% to 90% RH

Summary

Installation Guideline

System Requirements to Set up an ADAM Network

Details the necessary hardware and software components for setting up an ADAM network.

Basic Configuration and Hook-up

Explains the initial configuration and basic connection of ADAM modules to host switches.

Command Set

Syntax

IO Module Commands Search Table

Provides a comprehensive table to find commands for various I/O module types.

Analog Input Module Commands

Analog Input Common Command Set

Lists common commands applicable to multiple analog input modules, including configuration and data retrieval.

Analog Input Data Logger Command Set

Digital IO, Alarm and Event Command Set

Analog Output Module Commands

Analog Output Module Command for ADAM-4021

Lists commands specific to configuring and controlling the ADAM-4021 analog output module.

Analog Output Module Command for ADAM-4024

Calibration

Analog Input Module Calibration

Explains the software-based calibration procedures for analog input modules, including zero, span, and CJC calibration.

Analog Output Calibration

Describes how to calibrate analog output modules for mA and voltage ranges using software utilities.