I/O Modules
3-20 ADAM 4000 Series User's Manual
3.3 ADAM-4017/4017+/4018/4018M/4018+ 8-channel Analog
Input Modules
ADAM-4017/4018 8-channel Analog Input Module
The ADAM-4017/4017+/4018/4018+ is a 16-bit, 8-channel analog input
module that provides programmable input ranges on all channels. This
module is an extremely cost-effective solution for industrial measurement
and monitoring applications. Its opto-isolated inputs provide 3000 V
DC
of
isolation between the analog input and the module, protecting the module
and peripherals from damage due to high input-line voltages.
ADAM-4017/4017+/4018/4018+ offers signal conditioning, A/D conversion,
ranging and RS-485 digital communication functions. The module protects
your equipment from ground loops and power surges by providing opto-
isolation of A/D input and transformer based isolation up to 3000 V
DC
.
The ADAM-4017/4017+/4018/4018+ uses a 16-bit microprocessor-controlled
sigma-delta A/D converter to convert sensor voltage or current into digital
data. The digital data is then translated into engineering units. When
prompted by the host computer, the module sends the data to the host
through a standard RS-485 interface.
ADAM-4018M 8-channel Analog Input Data logger
The ADAM-4018M is a 16-bit, 8-channel analog input data logger featuring
programmable input ranges on all channels. This reliable and easy to use
analog input logger can store up to 38,000 measurements for a maximum
duration of 20 years. The ADAM-4018M can accept various analog inputs,
such as thermocouple, mV, V and mA, and offers three configurable logging
modes: standard log, event log, and mixed log. Optically isolated inputs
provide 500 V
DC
of isolation between the module and the analog input,
protecting the module and peripherals from damage due to high voltages on
the input lines. The ADAM-4018M is an extremently cost-effective
solution for industrial measurement and monitoring applications.
To Next Page
Loading...
Need help?
General
