EKI-1521/1522/1524 User Manual 56
2. Select which COM port you want to run a diagnostic test, and then press “Test”
button to process the testing.
Signal Test
RTS -> CTS check the RTS and CTS signal between two ports
DTR -> RI check the DTR and RI signal between two ports
DTR -> DSR check the DTR and DSR signal between two ports
DTR -> DCD check the DTR and DCD signal between two ports
Communication Parameters Test
Baud rate 50bps ~ 921.6kbps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity Odd, Even, None, Space, Mark
When the test is finish, it will show the test result, the click “Exit” button to return to
the utility window.
To Next Page
Loading...
