S
tart Guide
Bef
ore handling of the SIM card disconnect the router from power supply!
3.
Power
The router requires an external DC power supply. The DC voltage required is between
+5 to +18 V DC. Please connect the power adapter DC 5 V/2 A to the PWR connector on the
panel of the router (see figure below).
QSG-0005-EN,
October 9, 2018 4 Released in the Czech Republic
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
www.lucom.de