Advantek Networks AWR-1054GR User Manual

10
4) Power on DSL or cable modem first, then connect power adapter to the power jack on
the Wireless Router and plug the power cable into an outlet.
5) Check LEDs.
a) Once power on Wireless Router, Power LED should be on.
b) LAN LED should be on for each active LAN connection.
c) The WAN LED should be on when the DSL or cable modem is connected.
Warning: Only use the power adapter is provided from this package, use other
power adapter may cause hardware damage

Advantek Networks AWR-1054GR Specifications

General

Brand	Advantek Networks
Model	AWR-1054GR
Category	Wireless Router
Language	English