3.Click Setup, it then appears the sub-menu.
4.Click NetWare, it then as shown in the following picture.
Print Server Name: This option allows you to input print server name which configured by
PSAdmin utility or PCOMSOLE program.
Polling Time: The time interval in which the print server unit polls the file server for servicing of
print queues.
Logon Password: This option allows you to input encrypted password from the print server. The
print server login to NetWare server that administrator set password from
selected print server.
Use NDS Mode: To Enable NDS Mode, if you want to setup NDS environment. To select Tree
Name of NetWare then input context name in the Context box.
Bindery Mode: To Enable Bindery Mode, if you want to setup Bindery environment. To select
File Server Name of NetWare.
To Next Page
Loading...