INSTALLATION & OPERATING INSTRUCTIONS
These instructions must stay with the unit
Safety Instructions
This manual has safety information and instructions to help users eliminate or reduce the risk of
accidents and injuries.
Read and follow all safety information, installation guides, recommended precautions, and safe
operating instructions.
GENERAL INFORMATION
A. This air conditioner / heat pump is designed for:
1. Installation on a recreational vehicle.
2. Mounting on the roof of a recreational vehicle.
3. Roof construction with rafters/joists on 16 inch centers.
4. 2.5” to 5.5” inch thick roofs.
B. The efficiency of the air conditioner / heat pump will be affected by the
conditions inside and outside of the RV. Reducing the heat gain of the RV will
allow the air conditioner / heat pump to function with greater efficiency. Here are
some suggestions to reduce heat gain in your RV.
1. Select a shaded area to park your RV
2. Close windows and utilize the blinds and/or curtains.
3. Keep doors shut.
4. Avoid using appliances that produce heat.
Beginning the cooling / heating process early in the day will greatly improve the heat pump’s ability
to maintain the desired temperature.
In high temperature and high humidity environments, the air conditioner / heat pump should be set
in Cool mode with the Fan Speed in the high position. This will allow for optimal cooling
efficiency.
C. Condensation
The manufacturer of this air conditioner / heat pump will not be responsible for
damage caused by condensed moisture on ceilings or other surfaces. Air contains
moisture and this moisture tends to condense on cold surfaces. When air enters
the RV, condensed moisture may appear on the ceiling, windows, metal parts, etc.
The heat pump removes this moisture from the air during normal operation.
Keeping doors and windows closed when this air conditioner / heat pump is
operating will minimize condensation.
To Next Page
Loading...
Need help?
General
