Advent ADVKBWLS - Installing the Batteries; Connecting the USB Receiver; Activating the Keyboard

12
GB
Please ensure the battery’s polarities(+/–) match the battery
compartment’s polarities.
Installing the Batteries
1. Remove the battery cover. (Use a paper clip to help you open the
battery compartment cover if necessary.)
2. Insert the batteries.
3. Close the battery cover.
Connecting the USB Receiver
1. Leave your computer on.
2. Plug the Dongle directly into your computer’s USB port.
3. The keyboard will automatically connect to the computer.
Activating the Keyboard
If the keyboard does not respond, do the following:
1. Remove the dongle.
2. Re-insert dongle into the USB port.