Adventure Force Tactical Strike 5502-25 - User Manual

ALKALINE
BATTERIES
REQUIRED
[NOT INCLUDED]
1.5V
LR 20 size
6
x
Ages 14+ Item No. 5502-25
SET-UP INSTRUCTIONS
TRIGGER
MOTOR COVER
BATTERY COVER
SIGHT
3 TEAM COLOR MARKERS
GREEN / BLUE /RED
TRIGGER LOCK
QUICK LOAD
HOPPER
LID
NOZZLE
HOPPER
RELEASE
SWITCH
REV-TRIGGER
1. Loading Batteries
25 TACTICAL STRIKE™ ROUNDS
a. Push Hopper Release Button forward,
and remove Hopper.
b.
Unscrew Battery Cover, and pull back
slightly to unlock. Remove Cover.
c. Slide out Battery Case.
d.
Insert (x6) “D” batteries (not included).
Follow the polarity directions (See diagram).
e. Replace Battery Case. Close Battery
Cover, and screw to secure.
f. Replace Hopper, until it clicks into place.
g. Ensure that Motor Cover has been
completely closed, then press the
Rev-Trigger to check that the
batteries have been correctly installed.
ACCELERATOR
MOTORIZED BALL BLASTER
a.
b.
c.
d.
ROUNDS COMPATIBLE WITH ALL ADVENTURE FORCE™
TACTICAL STRIKE™ BALL BLASTERS AND MOST
STANDARD NERF® RIVAL™ BLASTERS.
MOTORIZED
FLYWHEEL

Adventure Force Tactical Strike 5502-25 Specifications