Need help?Do you have a question about the Adventure FLEX-ONE and is the answer not in the manual?
Guidance on riser usage, personalization, and control setup for optimal flight.
Details on customizing control placement and installing auxiliary controls (TST).
Specifications of Dominicotex fabric used for the canopy and ribs.
Details on upper and lower lines for 25, 28, and 32 m² FLEX-ONE models.
Specifications for upper and lower lines of the FLEX-ONE 36 m² model.
Precautions against UV light and high temperatures to preserve canopy life.
Instructions for packing, cleaning, and storing the wing for optimal performance.
Guidance on checking wing speed and the necessity of regular inspections.
Recommended procedures for wing inflation and safe take-off execution.
Guidance on using the reverse launch method in moderate wind conditions.
Explanation of the 360° spiral, its effects, and recovery procedure.
Instructions for performing and recovering from a B-line stall.
How to achieve efficient turns using weight shift and control inputs.
Methods for avoiding hazards and correcting turns in thermal conditions.
How to use the 'D' controls for emergency steering and control.
Guidance on landing approach, especially in strong winds.
Procedure to recover from a deep stall phenomenon if it occurs.
How to deal with spontaneous wing closures and prevent auto-rotation.
Discouragement of radical maneuvers and their associated risks.
Options for main control placement and auxiliary control installation on risers.
Guidance on using attachment loops for motor torque compensation.
Information on utilizing the FLEX-ONE in paragliding mode.
To Next Page
General