9
Set-up
Stove set-up:
1. Flip porcelain coated grate so that the support brackets are facing up.
2. Place stove on a at, heat-resistant surface.
3. Make sure the cartridge lock/unlock lever is in the UNLOCK position.
4. Make sure the ignition knob is in the OFF position.
5. Open canister storage.
6. Gently rotate the fuel cartridge until the notch ap is seated completely
into the fuel collar notch.
7. Press the cartridge lock/unlock lever on the front of the stove to the LOCK position.
NEVER USE A FLAME TO CHECK FOR GAS LEAKS.
1
5
3
6
4
7
To Next Page
Loading...