Adventys Induct-NoLimit MO4NL 16000 - Installation and Aeraulics; Airflow and Ventilation System

29
IMPORTANT:
Fresh air is sucked in at the front of the MO4NL module with a ow rate of approx.
600m3/hour. The fresh air is necessary to ensure the best cooling of the electronic
boards and the 16 inductors inside the cabinet.
The cabinet is equipped with several air lters. They are posioned on a plate acces-
sible from the front of the cabinet (fresh ltered air to cool the generators) and also
on the upper part above the 2 control panels (fresh ltered air for the inductors).
It is essenal to posion the cabinet in such a way that the hot air can be extracted
from the outside of the cabinet as much as possible.

’

Warm air exit at the back


Fresh air arrival
Warm air exit at the back

