34
EN
Short press on the SELECTION key on selected zone(s). A light point at the boom right of the corresponding
display(s) on the zone(s) lights for 5s. This corresponds to the me during which it is possible to turn the in-
cremental encoder to adjust the zone(s) in power or temperature (depending on the selecon P / T). Aer
5s, the zone(s) will automacally deselect itself, the light points will go out to indicate it and the acon on
the incremental encoder will no longer be taken into account.
Set the 4 zones in the desired conguraon then press the buon for 3 seconds. The 3 leds will ash,
use the incremental encoder to select one of the 3 memories (1, 2 or 3). Aer 3 seconds without any acon
the led lights up in a xed way and your conguraon is saved.
Just press the key and then select the conguraon (1,2 or 3) you want.
Just press the buon corresponding to the zone for 3 seconds. This also works with the GLOBAL selecon
key of the 4 zones.
-
-