Adventys Induct-NoLimit MO4NL 16000 - Advanced Operation Procedures; Adjusting Multiple Zones

35

Press the SELECTION key of the desired zone then use the incremental encoder to set
the desired power or temperature.
You have a delay of 5 seconds aer selecng the zone to start turning the encoder.
-
Press the SELECTION keys of the desired zones and then use the incremental encoder to adjushe desired
power or temperature.
You have a delay of 3 seconds aer selecng zones to begin turning the encoder.

Press the GLOBAL selecon key of the 4 zones and then use the incremental encoder to set the desired
power or temperature which will be idencal for the 4 zones.
-
-
-