40
The air lters located on the front of the furniture should be cleaned regularly with soapy water, depen-
ding on the level of air polluon inside the kitchen. The cleaning period can range from every 2 weeks
to every 2 months.
Once the lters have been cleaned, they must be put back in place completely dry before any new use.
The air lters protect all components inside the cabinet from dust and grease. They are essenal for
ltering the fresh air needed to cool all the components and electronic boards that operate the cabinet.
There are 10 square air lters that are posioned and accessible on a front plate inside the cabinet.
These lters lter the fresh air for the 4 electronic generators.
There are 2 air lters of rectangular shape which are present and accessible on the high front part, just
above the control panels. These lter the fresh air for the 16 inductors.
Your device is easy to clean, here are a few ps
Type of soiling How to proceed? Use
Light Soak the area to be cleaned well
with warm water, then wipe dry.
Sanitary sponges
Accumulaon of annealed dirt Soak the area to be cleaned well
using a special squeegee, roug-
hing glass, nish with the scraping
side of a sanitary sponge, then
wipe.
Sanitary sponges scraper special
glass
Aureoles and traces of limestone Apply warm white spirit vinegar to
the dirt, leave to act, wipe with a
so cloth. Use a commercial pro-
duct.
Special glass ceramic paste
Inlays from sugar, aluminum or
melted plasc spills
Apply a special glass-ceramic pro-
duct to the surface, preferably
with silicone (protecve eect).
Special product glass-ceramic
glass
To Next Page
Loading...