41
It is necessary to remove the
front plate in order to access
the rst 10 air lters.
To do so, hold, press and pull
the 2 pull tabs in the 2 corners
at the top of the plate.
When all 10 lters are acces-
sible, they must be removed by
successively unscrewing their
respecve xing knobs.
The lters can then be cleaned
and reassembled once dry.
Then, the 2 air lters that lter
the air to cool the inductors
(upper part of the cabinet) must
be manually removed.
It is then possible to clean them
before reposioning them once
dry.
To Next Page
Loading...