What to do if Advice OGMKS 1KVA-5KVA Inverter has no response after power on?
If your Advice Inverter doesn't respond after powering on, it could be due to the following reasons: * The battery voltage is too low. Check if the batteries and wiring are well-connected. Re-charge or replace the battery. * The battery polarity is reversed. Check the battery and wiring connections. Re-charge or replace the battery.
Why does my Advice OGMKS 1KVA-5KVA work in battery mode when mains exist?
If your Advice Inverter is running on battery mode even when mains are available, consider the following: * Check if the AC breaker is tripped and the AC wiring is properly connected. * Poor AC power quality from the shore or generator. Verify that the AC wires aren't too thin or long. If using a generator, ensure it's functioning correctly and that the input voltage range setting is correct. * Change the output source priority to utility first.
General| Capacity | 1KVA-5KVA |
|---|---|
| Type | Off-Grid |
| Frequency | 50Hz/60Hz |
| Battery Voltage | 12V/24V/48V |
| Waveform | Pure Sine Wave |
| Transfer Time | <10ms |
| Cooling | Fan Cooling |
| Protection | Overload, Short Circuit, Over Temperature |
Explains the manual's primary objective and scope for assembly, installation, operation, and troubleshooting.
Details the safety and installation guidelines, and information on tools and wiring provided.
Lists the key capabilities and functions of the multi-function inverter/charger.
Illustrates a typical system setup, including optional PV modules and other connected devices.
Identifies and describes the main components, indicators, and function keys on the inverter unit.
Procedures for checking package contents and unit condition upon arrival.
Steps to prepare the unit before connecting any wiring, including removing the bottom cover.
Guidelines and precautions for securely mounting the inverter unit on a suitable surface.
Detailed instructions and recommendations for connecting the battery to the inverter.
Guidelines and recommendations for connecting the AC input and output power sources.
Instructions and recommendations for connecting PV modules to the inverter.
Steps for completing the installation, including re-attaching the bottom cover and communication setup.
Procedure for turning the inverter unit on and off using the designated switch.
Description of the inverter's front panel, including indicators, LCD display, and function keys.
Explanation of the status and meaning of LED indicators (AC/INV, CHG, FAULT).
Details the purpose and operation of each function key (ESC, UP, DOWN, ENTER).
Icons related to AC and PV input sources and their associated data.
Icons indicating setting programs, warnings, and fault codes.
Icons representing output voltage, frequency, load percent, VA, and Watt.
Icons showing battery level, charging status, and voltage modes.
Details how battery capacity is displayed in battery mode and charging status.
Icons and descriptions for overload status and load percentage indicators.
Icons indicating different operating modes like Line, PV, and bypass.
Icon indicating when the unit's audible alarm is disabled.
Procedure for entering and navigating the setting mode using function keys.
Configures the priority of power sources (Solar, Utility, SBU) for load supply.
Sets the total charging current for solar and utility chargers.
Configures the acceptable AC input voltage range for appliances or UPS.
Enables or disables the power saving mode for reduced consumption.
Selects the battery type (AGM, Flooded, User-Defined) for optimal charging.
Configures automatic restart after overload or over-temperature events.
Sets the output frequency to 50Hz or 60Hz.
Sets the maximum charging current from the utility source.
Defines the voltage point for switching to utility when SBU priority is selected.
Configures the priority for charging the battery from solar or utility sources.
Enables or disables audible alarms for various conditions.
Configures whether the display returns to default after a period of inactivity.
Enables or disables the LCD backlight.
Configures audible alerts for primary source interruptions.
Enables or disables bypassing to line mode during overload conditions.
Enables or disables the recording of fault codes.
Sets the bulk charging voltage for 4K/5K models.
Sets the floating charging voltage for 4K/5K models.
Sets the low DC cut-off voltage for 4K/5K models.
Defines the order in which information is displayed on the LCD.
Shows how input and output voltages are displayed on the LCD.
Illustrates the display format for input and output frequencies.
Shows how battery voltage and output voltage are displayed together.
Illustrates the display of PV voltage and load percentage.
Shows how charging current and output voltage are displayed.
Depicts the display of input voltage and load in VA format.
Illustrates the display of input voltage and load in Watt format.
Shows how to check the main CPU firmware version.
Shows how to check the secondary CPU firmware version.
Describes the inverter's behavior in standby and power saving modes.
Explains fault conditions and their impact on operation.
Details operation when connected to the mains power.
Describes operation using battery and PV power.
Lists fault codes, their corresponding events, and icons.
Provides notes on the availability of specific fault codes for certain models.
Details warning codes, associated events, audible alarms, and icons.
Technical specifications for the inverter operating in line mode.
Explanation of how output power is reduced at specific input voltage levels.
Technical specifications for the inverter operating in inverter mode.
Specifications for utility charging, including current and voltage settings.
Diagram illustrating the three-step charging process.
Specifications for solar charging, including power, efficiency, and voltage ranges.
General specifications like safety certification, temperature, dimensions, and net weight.
Troubleshooting for issues causing automatic shutdown during the startup process.
Solutions for when the unit shows no indication after being powered on.
Diagnosing why the unit runs on battery despite mains existence.
Troubleshooting for the internal relay switching on and off repeatedly.
Interpreting and resolving continuous buzzer beeps and solid red LED.
Guidance for resolving specific fault codes like 07, 05, 02, 03, 01, 06/58, etc.
Tables showing approximate backup times for 1KVA, 2KVA, and 3KVA models.
Tables showing approximate backup times for 4KVA and 5KVA models.
Note on how battery quality, age, and type affect backup time.
To Next Page