EasyManua.ls Logo

Adya Clarity User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Adya Water Filtration System
Assembly & Maintenence Guide
Congratulations & Thank You!
You have purchased a highly effective and practical water filtration
system!
The Adya 5-Stage Water Filtration System is a gravity-fed, free-standing
device that does not require electricity and is BPA-free. When combined
with Adya Clarity, this system has been proven to remove or reduce
more than 250 harmful drinking water contaminants*.
With the Adya 5-Stage Water Filtration System, you can make fresh,
great-tasting drinking water in your own home while also eliminating
plastic bottles and landfill waste!
*All testing was completed by an independent, EPA-certified laboratory. The concentration of
indicated substances in water entering the system was reduced to a concentration less than
or equal to the permissible limit for water leaving the system as specified in NSF/ANSI 42.
Maintenance & Care Guidelines
• Unless you are adding Adya Clarity, do not use water that is
microbiologically unsafe or of unknown quality when using the
filtration system.
• Never use soap on any filters or parts (unless specified in instructions).
• Extended exposure to direct sunlight may result in algae growth. If
this occurs, wipe and rinse with cold water. (Discoloration on the
Micro Ceramic Filter will not affect the system’s performance.)
• Do not over-tighten the Nut when inserting the Micro Ceramic Filter.
• Do not overfill the Top or Bottom Tanks.
Filter Maintenance & Replacement
Micro Ceramic Filter
After several uses, a slimy residue will build up on the filter. When
this occurs, gently scrub and rinse the filter on all sides.
Replace each year (or 1,000 gallons) for best performance.
TIP! Help extend the life of your filter by using water that has been
pre-treated with Adya Clarity when filling the Top Tank.
4-Layer Earth Filter
Replace every 6 months (or 500 gallons) for best performance.
— Do not allow filter to dry out.
Troubleshooting
If the spout leaks, check to see that the Spigot and Spigot Nut aren’t
over-tightened and the Silicon Rings are correctly aligned on each side
of the Spigot.
If the filtration system is filtering slower than usual, check to see if
it’s time to clean the Micro Ceramic Filter (see guidelines above) or if
more water is needed in the Top Tank; because the system is gravity-
fed, the more water in the Top Tank, the faster it will filter.
— For user support, please contact your retailer or visit:
www.adyawater.com
Question and Answer IconNeed help?

Do you have a question about the Adya Clarity and is the answer not in the manual?

Adya Clarity Specifications

General IconGeneral
BrandAdya
ModelClarity
CategoryWater Filtration Systems
LanguageEnglish

Summary

Maintenance & Care Guidelines

Micro Ceramic Filter Maintenance

Instructions for cleaning the Micro Ceramic Filter's slimy residue and guidance on its annual replacement for optimal performance.

4-Layer Earth Filter Replacement

Details on replacing the 4-Layer Earth Filter every six months or 500 gallons, emphasizing the need to prevent it from drying out.

Troubleshooting Common Issues

Guidance for resolving common problems like spout leaks and slow filtration, including checks for component alignment and filter cleaning.

Congratulations & Thank You

Getting Started with Your Filtration System

Filtration System Assembly Steps

Comprehensive instructions for assembling the water filtration system, including component preparation and proper connection sequence.

Filling the Filtration System

Guidance on the process of filling the filtration system with water, including recommendations for using Adya Clarity for pre-treatment.

Adya Water Filtration System Component Diagram