Need help?Do you have a question about the AEA RPQ500 and is the answer not in the manual?
Detailed description of the physical controls and indicators on the front panel of the RPQ500 unit.
Details on connecting microphones and line-level signals to the RPQ500, including input impedance.
Specific instructions for using the RPQ500 with microphones, including phantom power considerations.
How to use the RPQ500 for line-level signals, bypassing the mic preamp stage.
Information on balanced and unbalanced output signals and proper cabling.
Step-by-step guide to setting input and output gain for optimal performance in mic mode.
How to set gain levels when using the unit in line input mode, including headroom.
General| Type | Microphone Preamplifier |
|---|---|
| Channels | 1 |
| Input Impedance | 1.5 kΩ |
| Polarity Switch | Yes |
| Module Format | 500 Series |
| Maximum Output Level | +28 dBu |
| Phantom Power | 48V |
| EQ Frequencies | 5 kHz |
To Next Page