Need help?Do you have a question about the AEB COBRA AEB510N and is the answer not in the manual?
General| Brand | AEB |
|---|---|
| Model | COBRA AEB510N |
| Category | Computer Hardware |
| Language | English |
Important safety guidelines for installation and operation, including protection from water, heat, electrical hazards, and unauthorized tampering.
The COBRA processor can be reprogrammed by updating its software, allowing adaptation to different car models.
AEB510N replaces AEB510; connection wiring differs from PICK-UP models.
Wiring plug inserted in the Variator's connector for standard use.
Move wiring to EMERGENCY connector to restore original connection in case of failure.
Details on feeding tension, advance regulation range, and physical dimensions of the processor box.
Identifies programming microswitches, connectors, and registers on the processor's lower side.
Explains the function of the advance intervention register for timing adjustments.
Configuration of microswitches for setting advance degrees (6°, 9°, 12°, 15°).
Setting microswitches to select the specific car model for optimal performance.
Visual guide for setting microswitches to achieve 6°, 9°, 12°, or 15° advance.
Visual guide for setting microswitches for Renault/Volvo or all other car types.
Describes the setting for the intervention point based on the throttle potentiometer signal.
Step-by-step guide to adjust the advance intervention register using the red LED indicator.
Diagram showing connection to the camshaft position sensor for specific car types.
Diagram showing connection to the crankshaft sensor interface for the processor.
Diagram showing wiring to the throttle position sensor and power/ground connections.
To Next Page