Need help?Do you have a question about the AED VANTAGE SLA-4C20-GMSL3 and is the answer not in the manual?
Overview of the SLA for test vehicles with MIPI CSI-2 sensor ECUs.
Lists related AED products like SLA-1C-GMSL and SLA-4C-GMSL.
Lists User Instructions Manual, Technical datasheet, and User Reference Manual.
Explains warning and caution pictograms used in the manual.
Covers risks like overvoltage, ESD, unauthorized opening, and incorrect connections/accessories.
Advises on hot surfaces, shocks, dust, moisture, pollution, and PoC overcurrent.
Covers ground loop avoidance and LASER class 1M warnings for MPO connectors.
Details manufacturer liability exclusion for improper use.
Specifies the device is for engineering purposes only, not series production.
Outlines the 12-month warranty period and exclusions.
Lists key points for using the SLA, including qualifications, environment, safety, and specific warnings.
Details common ground connections and the need for galvanic isolation for the SLA.
Describes the nameplate information on the SLA, including P/N, S/N, revision, and input specs.
Overviews the physical interfaces and their positions on the front side of the SLA.
Details the pinning and function of the Power and Wake connector.
Explains the meaning of the left (mode) and right (alive) status LEDs.
Describes the ECU debug connector, its purpose, and hybrid connector details.
Details SerDes out and SerDes in interfaces, their function, and pin mapping.
Describes the 1000BASE-T control port, its LEDs, and the 10G Ethernet Data Link interface.
Specifies requirements for electrical connection of the SLA enclosure to the vehicle chassis.
Advises operating the device in an ESD-compliant environment.
Lists conditions like indoor use, altitude, temperature, humidity, and voltage fluctuations.
Guides on connecting the SLA to a 12 V DC nominal power supply and initial boot process.
Explains connecting the SLA via Ethernet to a PC using default or secondary IP addresses.
Explains how to access the SLA's web interface via a browser for configuration and monitoring.
Illustrates an application example of the SLA in logging mode, connecting sensors to the ECU.
Illustrates an application example of the SLA in replay mode for HIL test benches.
Explains the recovery feature for restoring the SLA to a known-good software version after a power failure during updates.
Provides a table of electrical and technical data for the SLA.
Advises on optimal conditions for unused storage, including temperature, humidity, and environment.
Specifies transport conditions like temperature, humidity, and packaging requirements.
Informs users about responsible disposal according to WEEE Directive and local provisions.
Covers safety precautions for short circuits and using recommended accessories/spare parts.
Provides guidance on cleaning the device to prevent damage from pollution or liquid penetration.
Guides users to contact SLA support for malfunctions and outlines the RMA process.
Provides information on AED Vantage GmbH's product wiki and contact details for support.
States compliance with EU directives and harmonized standards for the SLA.
General| Brand | AED VANTAGE |
|---|---|
| Model | SLA-4C20-GMSL3 |
| Category | Adapter |
| Language | English |
To Next Page