AEE Aerial Photography Equipment
Professional·Advanced
- 12 -
The following figure shows the six planes that need to be calibrated:
2. Calibration of gyroscope: Place the aerial photography equipment on a horizontal plane, and keep it away from
vibration sources; at this moment, the front lights (green) turn constantly on. About 1s later, turn the remote
control joysticks to an upper toe-out shape (as shown in the figure) until the rear lights (red) begin to flash, and
then loosen the joysticks; when the rear lights (red) turn on, the calibration is finished.
To Next Page
Loading...
