AEG 72630 - Change the Washing Programme

Operating Instructions
23
3
The counting down of the remaining time may be stopped or corrected
by the washing machine controller as a result of automatic adjustments
to the programme (amount of washing, washing type, imbalance de-
tection, special rinse cycle, etc.).
Change the washing programme
Changing or stopping the wash programme
0 1. Press the START/PAUSE button.
2. Turn the programme selector to OFF. The washing programme is
stopped.
3. If required, set a new washing programme. Otherwise, turn the pro-
gramme selector to PUMP OUT and press the START/PAUSE button.
3
The washing programme can be interrupted at any time with the
START/PAUSE button and can be continued by pressing the button
again. Changing the washing programme is only possible after the pro-
gramme selector has been turned to OFF.
Selecting the programme options.
The programme options QUICK WASH or STAIN can still be selected af-
ter the programme starts.
0 1. Press the START/PAUSE button.
2. Press the QUICK WASH or STAIN button.
3. Press the START/PAUSE button again. The washing programme is
continued.
Changing the Spin Speed
During the washing programme, the spin speed can still be changed or
RINSE HOLD can be set.
0 1. Press the START/PAUSE button.
2. Change the speed with the Spin speed / RINSE HOLD button.
3. Press the START/PAUSE button again. The washing programme
continues.