Need help?Do you have a question about the AEG 760 D and is the answer not in the manual?
General| Brand | AEG |
|---|---|
| Model | 760 D |
| Category | Ventilation Hood |
| Language | English |
Safety guidelines for electrical installers regarding power points and wiring.
Guidelines for kitchen furniture installers on exhaust air, ventilation, and fire regulations.
Explains appliance can be used as exhaust or return air, requiring carbon filter for return air.
Identifies key components like sliding switch, filter grille, lighting, control panel, and extractor part.
Details dimensions, weight, connection value, total connected load, fan motor, and lighting.
Specifies fan outputs by model and settings, and the length of the power cable.
Illustrates the 120 mm dia. pipe connection for the 760 D model.
Shows stepped pipe connections (100/115 to 120 mm) for the 710 D model.
Lists necessary items like drilling templates, screws, spacers, and air outlet grilles.
Instructions for cutting a 140 mm hole in the wall unit ceiling for exhaust air.
Details the MKZ telescopic wall box for running fume exhaust to the outside.
Provides diagrams for the dimensions and position of air outlet openings.
Recommends non-flammable hoses and specific E-Nr. for 760 D and 710 D models.
Instructions on inserting and securing the exhaust air union using a bayonet catch.
Instructions for cutting a 150 mm hole for ventilation grille in return air operation.
Specifies minimum distance and mounting for integrating a spice rack.
Step-by-step guide for mounting the fume extractor hood for exhaust air operation.
Details on mounting screws, engaging claws, and inserting metal fat filters.
Instructions for measuring, kinking, and fastening a finishing strip to cover cupboard gaps.
Steps for inserting and fixing the holding frame for the active carbon filter.
Guide on removing foil and placing the active carbon filter into the holding frame.
Instructions for unfolding grips and detaching rear and front metal fat filters.
Steps for loosening mounting screws and releasing mounting claws to remove the hood.
Procedure for loosening end stop brackets and setting extraction depth (275-335 mm).
Steps for detaching internal cover and mounting the light screen.
Ensure electricity supply voltage matches appliance rating plate for safe operation.
Guidance for UK users on wiring mains lead (Green/Yellow, Brown, Blue) to plug terminals.
Specifies fuse rating (13 amps) and guidelines for fuse replacement and plug fitting.
Covers cooking safety, fire prevention, and electrical safety during maintenance.
Stresses regular filter cleaning/replacement to prevent fire hazards from fat buildup.
Shows diagrams identifying the extractor part (A) and control panel (B).
Guide to operating the appliance using sliding switches after fully withdrawing the extractor part.
Explains symbols and numbers for blower control, lighting, and settings on the switches.
Details blower control, lighting, fan cycles, and metal fat filter cleaning.
Specifies replacement interval (1 year) and properties of the active carbon filter.
Step-by-step instructions for removing and cleaning the metal fat filter grilles.
Instructions for removing the old filter and inserting a new active carbon filter using red clips.
Instructions for safely replacing the light bulbs in the 710 D fume extractor hood.
Instructions for replacing the fluorescent lamp or starter in the 760 D fume extractor hood.
Advises using mild solutions for outer parts, control panel, and filter grilles.
Warns against introducing sharp objects into the motor protective grille.
Catalog of available special accessories like carbon filters, hoses, and wall boxes.
Information on customer service contacts and indications for faults (E- and F-No.).
To Next Page
