Frost may build up on the surface of
cabinet frame or inner liner after a period
of using time.
It is recommended to scrape away the
frost with the plastic ice scraper (included
in accessories bag) each month or when
the frost layer reaches a thickness of
about 10 mm.
9.3 Defrosting the freezer
CAUTION!
Do not use a mechanical or
electrical device to speed up
the thawing process. Do not
use any artificial means.
Defrost the freezer when the frost layer
reaches a thickness of about 10 mm.
1. Switch off the appliance.
2. Remove any stored food, wrap it in
several layers of newspaper and put
it in a cool place.
3. Remove the drain plug from the
inside of the appliance.
4. Leave the lid open.
5. Place a tray beneath the outer drain
plug.
6. Pull out the outer drain plug.
7. Rotate the drain plug 180 degrees to
let the drain water flow into the tray.
www.aeg.com32
To Next Page
Loading...
