Why my AEG BPE948230M does not turn on or heat up?
If your AEG Oven isn't turning on or heating up, here's what you can check: * Ensure the oven is properly connected to the electrical supply. * Verify that the clock is set. * Make sure the oven door is fully closed. * Check the fuse to see if it has blown. If it continues to blow, contact a qualified electrician. * Confirm that the Child Lock feature is not activated.
What to do if my AEG BPE948230M has problems with Wi-Fi signal?
If you're experiencing Wi-Fi signal issues with your AEG Oven, consider the following: * Check your wireless network and router, and try restarting the router. * If you've installed a new router or changed your router configuration, you may need to configure the oven and mobile device again. * If the wireless network signal is weak, move the router closer to the oven. * Ensure that a nearby microwave appliance isn't disrupting the wireless signal; if so, turn off the microwave.
What does error F601 mean on my AEG Oven?
If your AEG Oven shows error code F601, it indicates a problem with the Wi-Fi signal. You should check your network connection.
What to do if my AEG Oven shows error F604?
If your AEG Oven displays error F604, it means the initial Wi-Fi connection failed. Try turning the oven off and then on again to retry the connection.
What does error F602 and F603 mean on my AEG BPE948230M?
If your AEG Oven is showing error codes F602 or F603, it means that Wi-Fi is not available. Try turning the oven off and on again.
What to do if my AEG BPE948230M shows error F908?
If your AEG Oven shows error F908, it means the oven system cannot connect with the control panel. You can try turning the oven off and on again.
What does error F111 mean on my AEG Oven?
If your AEG Oven displays the error F111, it indicates that the food sensor is not correctly inserted into the socket. Fully plug the food sensor into the socket.
What does error C3 mean on my AEG BPE948230M?
If your AEG Oven displays error code C3 during Pyrolytic Cleaning, it means the door is not fully closed. Close the door completely.
What to do if my AEG BPE948230M shows error C2?
If your AEG Oven shows error code C2 during Pyrolytic Cleaning, it means the Food sensor is in the oven cavity. Take out the Food sensor.
To Next Page
General
