Step 5 Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6 After the first part is over, empty the deep pan and put it back on the first shelf
position.
Duration of the second part: around 35 min
Step 7 Fill the remaining part of the water drawer with water to the maximum level un‐
til the signal sounds or the display shows the message.
Step 8 When the function ends, remove the deep pan.
When this function works, the lamp is off.
When descaling ends:
Turn off the oven. When the oven is cold, dry
the cavity with a soft cloth.
Leave the oven door open
and wait until the cavity is
dry.
If some limestone residue remains in the oven after descaling, the display prompts to
repeat the procedure.
12.6 Descaling reminder
There are two reminders which prompt you to descale the oven. You cannot disable
the descaling reminder.
Type Description
Soft reminder Recommends you to descale the oven.
Hard reminder Obligates you to descale the oven. If you do not descale the oven
when the hard reminder is on, the steam functions are disabled.
These reminders activate each time you turn off the oven.
12.7 How to use: Rinsing
Before you start:
Turn off the oven and wait until it is cold. Remove all accessories.
Step 1 Place the deep pan on the first shelf position.
Step 2 Fill the water drawer with water to the maximum level until the signal sounds
or the display shows the message.
Step 3 Select: Menu / Cleaning / Rinsing.
Duration: around 30 min
www.aeg.com46
To Next Page
Loading...
