Top lamp
Step 1 Turn the glass cover to remove
it.
Step 2 Remove the metal ring and clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Attach the metal ring to the glass cover and install it.
Side lamp
Step 1 Remove the left shelf support to
get access to the lamp.
Step 2 Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass
cover.
Step 3 Clean the glass cover.
Step 4 Replace the lamp with a suitable
300 °C heat-resistant lamp.
Step 5 Install the glass cover.
Step 6 Install the left shelf support.
13. TROUBLESHOOTING
13.1 What to do if...
Problem Possible cause Remedy
You cannot activate or oper‐
ate the oven.
The oven is not connected to
an electrical supply or it is
connected incorrectly.
Check if the oven is correctly
connected to the electrical
supply (refer to the connec‐
tion diagram if available).
The oven does not heat up. The oven is turned off. Turn on the oven.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are
not set.
Make sure that the settings
are correct.
ENGLISH 49
To Next Page
