11.10 How to use: Tank emptying
Use it after cooking with steam heating function to remove the residual water from the water
drawer.
Before you start:
Turn off the oven and wait until it is cold. Remove all accessories.
Step 1 Place the deep pan on the first shelf position.
Step 2 Select: Menu / Cleaning / Tank emptying.
Duration: 6 min
Step 3 Turn on the function and follow the instruction on the display.
Step 4 When the function ends, remove the deep pan.
When this function works, the lamp is off.
11.11 How to remove and install: Door
You can remove the door and the internal glass panels to clean it. The number of glass panels
is different for different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass, especially around the edges of the front panel. The glass can
break.
Step 1 Fully open the door.
Step 2 Lift and press the clamping
levers (A) on the two door
hinges.
Step 3 Close the oven door to the first opening position (approximately 70° angle). Hold the
door at both sides and pull it away from the oven at an upwards angle. Put the door
with the outer side down on a soft cloth on a stable surface.
43/60
CARE AND CLEANING
To Next Page
Loading...
Need help?
General
