EasyManua.ls Logo

AEG BSS 4809 - Page 52

AEG BSS 4809
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
52
Supplied parts (not shown)
1Chargercable(TypeAUSBtoMicro-BUSB)
Charging the integrated battery
The device is operated via the integrated lithium battery. Charge the battery as follows:
1. Plug the micro B USB plug of the charging cable into the jack (8) of the device. Con-
nect the USB plug to a powered-on computer. The indicator lamp lights up red and
the battery charges.
2. If the battery is completely charged, the indicator light (5) will light up green.
3. RemovethechargercablefromthespeakerandPC.
CAUTION:
Never leave the unit unattended when it is charging.
NOTE:
• ThebatteryisonlychargedwhilethePCisswitchedon.
• Donotconnecttheplayerforalongperiodoftimetoalaptopcomputerdiscon-
nected from mains power Otherwise the laptop computer’s battery may be dis-
charged.
• Thechargingtimevariesaccordingtobatteryuse.
• Shouldyounotusethedeviceforlongerthanhalfayear,chargethebatteryatleast
every 6 to 12 months. The battery will also constantly discharge when switched off.
• Ifthebatterychargeisnearingitsend,thecontrollight(5)willblinkduringplayback.
Location
Selectasuitablelocationfortheunit.Adry,even,non-slipsurfaceonwhichyoucaneasily
operate the unit is suitable.
Use
You have two ways to use the device: By cable or cordless via Bluetooth.
By cable
1. Connectthe3.5mmstereoRCAcabletoanexternalaudiosource.Ifrequired,usea
suitable adapter (not included).
2. InserttheotherendofthecableintotheAUXINjack(7)ontheunit.

Related product manuals