AEG BSS 4826 - Usage and Connectivity; Recommended Location; Using the Device by Cable

English
50
Charging the integrated battery
The device is operated via the integrated lithium battery. Charge the battery as follows:
1. Plug the micro B USB plug of the charging cable into the jack (1) of the device. Con-
nect the USB plug to a powered-on computer. The indicator lamp lights up red and
the battery charges.
2. When the battery is fully charged, the indicator light will go out (7).
3. RemovethechargercablefromthespeakerandPC.
CAUTION:
Never leave the unit unattended when it is charging.
NOTE:
• ThebatteryisonlychargedwhilethePCisswitchedon.
• Donotconnecttheplayerforalongperiodoftimetoalaptopcomputerdiscon-
nected from mains power Otherwise the laptop computer’s battery may be dis-
charged.
• Thechargingtimevariesaccordingtobatteryuse.
• Whenthesystemisnotusedforlongperiods,chargethebatteryatleastevery6to
12 weeks. The battery will also constantly discharge when switched off.
• Whenthebatteryisalmostempty,theindicatorlight(7)willashrapidly.
Location
Selectasuitablelocationfortheunit.Adry,even,non-slipsurfaceonwhichyoucaneasily
operate the unit is suitable.
Use
You have two ways to use the device: By cable or cordless via Bluetooth.
By cable
1. Connectthe3.5mmstereoRCAcabletoanexternalaudiosource.Ifrequired,usea
suitable adapter (not included).
2. InserttheotherendofthecableintotheAUXINjack(2)ontheunit.Theindicatorlight
(7) lights up.
3. Switch the speaker on by pressing the
/ button(6)forapprox.3seconds.
4. Controlthevolumeontheexternalaudiosource.