AEG BSS 4826 - Power On;Off and Automatic Connection

English
52
NOTE:
• Dependingonthedevicemanufacturer,youneedtoperformtheregistration(PAIR-
ING) again to connect the devices.
• Inthecaseofproblemswiththepairingofaplaybackdevice,deactivatetheWiFi-/
and mobile data function in your playback device.
• TheBluetoothcompatibilitycannotbeensuredfordevices(e.g.mobilephones)get-
ting released in the future.
• Toensureanoptimalconnection,makesurethatthebatteryofyourplayeriscom-
pletely charged.
• Someofthemobilephonebrandshaveanenergy-savingmode.Deactivatethe
energy-saving mode as it can otherwise result in problems during the data transfer
through Bluetooth.
• Tobeabletotransferaudiodata,Bluetoothneedstostayactivatedinyourplayer.
Observe the operation manual of your player.
• Ifamobilephoneonwhichyouareplayingmusicreceivesacall,themusicwillbein-
terrupted. Press the / button (6), to accept the call. The sound is replayed by the
loudspeakers. Speak into the microphone on the device or transfer the conversation
to your mobile phone. To do this, observe the overlay in the display of the mobile
phone.Afteryouhaveendedthecall,thedevicesareconnectedtoeachotheragain
and playback continues.
Operation
/ On/Off (6)
• Switchthespeakeronbypressingthe
/ button(6)forapprox.3seconds.The
control light (7) will start to blink.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected auto-
matically. The prerequisite for this is:
• Thedeviceswerealreadyconnectedwitheachother.
• Bluetoothisactivatedinyourplayer.
• Keepthe
/ button (6) pressed for about 2 seconds to turn off the loudspeakers
again. The units are disconnected.
NOTE:
To save the battery, switch off the speaker when not in use.