AEG DBE7980HB - Controls; Lighting

8
www.aeg.com
4. CONTROLS
A B C D E
Button Function Led
A Turns o󰀨 the motor. -
Press and hold the button for approximately 2 seconds, with all
the loads turned o󰀨 (Motor+Lights), to reset the Filter saturation
alarm. All led ashes three times.
Flashing.
With the motor turned o󰀨:
Saturation of the grease lters takes place after 100 hours of
continuous operation of the hood.
Flashes
once a
second.
B Turns the Motor on at speed 1. On.
C Turns the Motor on at speed 2. On.
Press and hold the button for 2 seconds to activate Delay O󰀨
function for speed 1, 2 and 3.
After 6 minutes the fan will automatically turn o󰀨.
Flashes
once a
seconds.
D Turns the Motor on at speed 3. On.
Press and hold for 2 seconds to activate Intensive Boost speed.
After 6 minutes, the motor will automatically return to the speed
that the hood was previously set to.
To deactivate it, press button D once more or press button A.
Flashes
once
every 0.5
seconds.
E Press briey: Turns the lighting system on and o󰀨 at maximum
intensity.
On.
Press and hold to change the lighting intensity up or down. -
5. LIGHTING
• For replacement contact technical
support (“To purchase contact techni-
cal support”).