AEG ECLIPSE 10 - Set the Key Tone; Rename the Handset; Set the Display Language; Set Auto Hang-up

13.3 Set the Key Tone
The handset emits a tone with each key press. You can choose to turn this tone on or off. The default
setting is ”ON”.
tFrom the home screen, press
.
tPress
to “HANDSET OPTS” and then press to select.
tPress
to “RINGER&TONES” and then press to select.
tPress
to “KEY TONE” and then press to select.
tPress
to select “ON” or “OFF” and then press to confirm.
>A confirmation tone is played.
tPress
to return to standby mode.
13.4 Rename the Handset
You can personalise your handset by changing the name shown on the handset in standby mode.
tFrom the home screen, press
.
tPress
to “HANDSET OPTS” and then press .
tPress
to select “HANDSET NAME”.
tThe current handset name is displayed.
tPress
to delete the letters one by one and enter the new name (maximum 10 characters).
tPress
to confirm.
>A confirmation tone is played.
tPress
to return to standby mode.
13.5 Set the Display Language
You can change the display language on your handset.
tFrom the home screen, press
.
tPress
to “HANDSET OPTS” and then press to select.
tPress
to “LANGUAGE” and then press to select.
tPress
to select your preferred language and then press to confirm.
>A confirmation tone is played.
tPress
to return to standby mode.
Note: Once the display language is set, the handset will switch to display in the selected language
immediately.
13.6 Set Auto Hang-up
This function enables you to end a call automatically by simply placing the handset back on the base unit
(main Eclipse handset) or charging pod (additional handsets). By default, the Auto Hang-up feature is ON,
but it can be turned off.
tFrom the home screen, press
.
tPress
to “HANDSET OPTS” and then press to select.
tPress
to „AUTO HANG-UP“ and then press to select.
tPress
to select “ON” or “OFF” and then press to confirm.
>A confirmation tone is played.
tPress
to return to standby mode.