What to do if my AEG Telephone is displaying 'Searching'?
If your AEG Telephone shows 'Searching,' it might be due to the base station being out of range. Try reducing the distance between the handset and the base station. Alternatively, the base station might not be connected to the mains. Ensure the base station is properly connected to a power outlet.
Why is there no dialing tone on my AEG Telephone when I press the talk button?
If you're not getting a dialing tone when you press the key on your AEG Telephone, check these things: 1. Make sure the base station's connection cord is properly plugged in. Unplug it and plug it back in, checking both the base station and the phone socket. 2. Verify the adapter cord is correctly plugged into the base station and the 220V plug. Try removing and re-plugging it. 3. The line may be busy because another handset is in use. Wait until the line becomes free. 4. Ensure you are using the original connection cord (Euro AS).
What to do if my AEG Telephone call does not work?
If your AEG Telephone call isn't working, it could be due to service activation issues, an incorrect operator, or wrong settings. Verify your subscription with your network provider or try changing the dial mode.
Why is my AEG Telephone not connecting properly when dialing through a PBX?
If you experience no or wrong connection after dialing on your AEG Telephone when connected to a PBX, a dialing prefix might be necessary. Try inserting the appropriate dialing prefix.
How to fix no display on AEG Telephone?
If your AEG Telephone has no display, the battery may be empty. Try recharging the battery.
Connect the telephone base station to power and phone line for initial setup.
Insert and charge the handset batteries for the first time for proper operation.
Understand the navigation and organization of the phone's menu system.
Instructions for initiating outgoing calls using different dialing methods.
Procedure for responding to incoming telephone calls.
Steps to terminate an active telephone conversation.
How to control the loudness of audio during calls.
Temporarily disable the handset's microphone during a conversation.
Accessing and using the list of recently dialed numbers.
Initiate calls between registered handsets on the same base.
Redirect an ongoing external call to a different handset.
Set up a call involving three participants.
Save new contact names and numbers into the phone's memory.
Modify existing contact details in the phonebook.
Access and review the history of incoming and outgoing calls.
Make a call directly from an entry in the call history.
Adjust various operational parameters for the handset.
Configure parameters for the telephone base station.
To Next Page
General
