AEG Light - REGISTER AN ADDITIONAL HANDSET; RESTORE THE HANDSET TO DEFAULT SETTINGS; BASE SETTINGS




Page
20 

9.Press<RIGHT/LEFT>toselectyourdesiredcolourtheme.
10.Press<OK>toconfirm.
8.1.7 Setlanguage(Optional)
1.Repeatstep1insection
8.1.1.
2.Press<OK>and<UP/DOWN>toselectLanguage.
3.Press<OK>and<LEFT/RIGHT>toselectthedesiredlanguage.
4.Press<OK>toconfirm.
8.1.8 Turnonorofftheautoanswer
1.Repeatstep1insection 8.1.1.
2.Press<OK>and<UP/DOWN>toselectAutoAnswer.
3.Press<OK>and<LEFT/RIGHT>toturnonorofftheAutoAnswerfeature.
4.Press<OK>toconfirm.
8.1.9 Registeranadditionalhandset
Youcanregisterupto5handsetsperbasestation.
1.Repeatstep1insection
8.1.1.
2.Press<OK>and<UP/DOWN>toselectRegister.
3.Press<OK>and<LEFT/RIGHT>toselectthedesiredbasestationthatyouwantyourhandsettoregisterto.
4.Press<OK>toenterthe4-digitsystemPIN.
Note:4-digitPINisenteredin****.Once4digitsareentered,therightsoftkeywillbecomeOK.
5.Pressandhold<PAGE>onthebasestation.
6.Press<OK>onthehandsettoconfirm.
Note:“Registering…”willdisplay.Abeeptoneisemittedfromthehandsettoindicatesuccessfulregistrationand
thescreenreturnstoidlemode.
IfthebaseisfoundandthePINiscorrect,anunusedhandsetnumberwillbeassignedautomatically.
IfthePINisincorrect,“IncorrectPIN”willdisplaywithanerrortone,andthehandsetreturnstoidle.
Ifnobaseisfoundwithinacertainperiod,“NoBaseFound”willdisplaywithanerrortone,andthehandset
returnstoidle..
8.1.10 De-Registerahandset
1.Repeatstep1insection
8.1.1.
2.Press<OK>and<UP/DOWN>toselectDe-register.
3.Press<OK>toenterthe4-digitSystemPIN.
Note:4-digitPINisenteredin****.Once4digitsareentered,therightsoftkeywillbecomeOK.
4.Press<OK>and<LEFT/RIGHT>toselectthehandsetthatyouwanttode-register.
Note:Onlysubscribedhandsetsarelisted.Thehandsetcurrentlyusedcannotbede-registered.
5.Press<OK>tode-registerthehandset.
6.Press<YES>toconfirmhandsetde-registration.
7.“De-registered”willdisplayandgobacktoidle.
8.1.11 Restorethehandsettodefaultsettings
1.Repeatstep1insection 8.1.1.
2.Press<OK>and<UP/DOWN>toselectHandsetReset.
3.Press<OK>and<YES>toconfirmresettingthehandsettodefaultsettings.
Note:Phonebookandspeeddialentrieswillnotbedeletedafterhandsetreset.

8.2 BaseSettings
8.2.1 Setthebaseringer
InIdle:
1.Press<Menu>and<4-WayKey>toselectBaseSettings.
2Press<OK>and<UP/DOWN>toselectRinger.
3Press<OK>and<LEFT/RIGHT>toselectyourdesiredmelodyforyourbaseringer.(Atotaloffivemelodiesfor
baseringerareprovided.)
4.Press<DOWN>and<LEFT/RIGHT>toselectyourdesiredringervolumefromLevel1toLevel5orOff.
5.Press<OK>toconfirm.