AEG Eclipse 15 - Handset Display Icons and Symbols; Base Unit Indicators

UK
6.1.3 Call from the Redial List
tPress
in standby mode.
>The last number dialled is displayed.
tPress
to select the desired entry in the redial list and then press to dial out the selected redial
number.
6.1.4 Call from the Call Log
tPress
in standby mode.
tPress
to select the desired entry in the call log and then press to dial out the selected call log
number.
Note: You need to subscribe to Caller Line Identification service to be able to see the caller’s number or
name in the call log.
6.1.5 Call from the Phonebook
tPress
in standby mode.
tPress
to select the desired entry in the phonebook and then press to dial out the selected
phonebook number.
6.2 Answer and End a Call
tWhen the phone rings, press
on your handset.
tTo end a conversation, press
on your handset.
Warning: When the handset is ringing, please do not hold it too close to your ear as the volume of the
ringing tone may damage your hearing.
Note: You can simply place the handset back on its base station to end the call, provided you have not
deactivated the Auto hang-up feature.
6.3 Handset Speakerphone
During a call, you can press
to alternate between hands-free speakerphone and handset earpiece.
6.4 Adjust Earpiece Volume
There are 5 levels of earpiece volume on your Handset.
tDuring a call, press
to select from “VOLUME 1” to “VOLUME 5”.
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
6.5 Adjust Speaker Volume
There are 5 levels of speaker volume.
tDuring a handsfree call, press
to select from “VOLUME 1” to “VOLUME 5”.
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
6.6 Mute/Unmute the Microphone
tWhen the microphone is muted, the handset displays “MUTE ON” and your caller cannot hear you.
tDuring a call, press
to turn on/off the microphone.