Need help?Do you have a question about the AEG Ergorapido and is the answer not in the manual?
General| Charging time | 4 h |
|---|---|
| Variable power | Yes |
| Battery technology | Lithium |
| Maximum input power | - W |
| Annual energy consumption | - kWh |
| Type | Upright vacuum |
| Cleaning type | Dry |
| Dust capacity | - L |
| Product color | Blue, Metallic, Stainless steel |
| Tube material | - |
| Dust container type | Bagless |
| Proper use | Home |
| Noise level | - dB |
| Cleaning surfaces | Hard floor |
| Dirt separating method | Cyclonic |
| Vacuum brushes included | Dusting brush |
Weight and Dimensions| Weight | 3150 g |
|---|---|
| Package weight | 4190 g |
Position the charging station near a mains socket, away from heat/wet. Connect adaptor.
Check nozzle wheels and brush roll for debris to prevent scratching delicate floors.
Remove hand unit by pressing release buttons. Attach crevice nozzle or brush for cleaning.
Lift cover, vacuum dust container using another vacuum cleaner.
Release container, remove filters, empty contents, reinsert filters and container.
Clean fine filter by pulling spring if suction decreases.
Release container, remove filters, clean parts, dry, and reassemble.
If brush roll is blocked, push release button, remove hatch cover, and then the brush roll.
Remove bellows by loosening catch, clean with a stick, and reattach to maintain suction.
Remove wheels by prying them loose, clear debris, and press back into tracks.
Remove batteries before disposal; return used batteries to a recycling station.
To Next Page
