Why my AEG Kettle cannot be switched on?
If your AEG Kettle cannot be switched on, it might be because it has overheated after being used with little or no water. Allow the appliance to cool down for a short time, and then try again.
How to fix AEG Kettle that switches off before boiling?
If your AEG Kettle switches off before boiling, it is likely due to excessive limescale buildup on the heating element. You should run the decalcifying procedure to resolve this issue.
What to do if my AEG Kettle does not switch off?
If your AEG Kettle does not switch off, make sure that the lid is closed and locked properly. Also, ensure that the mesh filter is correctly inserted.
Crucial safety warnings for first-time use and general operation in German and Greek languages.
Continues safety warnings for first-time use and operation in Dutch and French languages.
Addresses common problems like the appliance switching off unexpectedly or not turning on, with solutions.
Essential safety guidelines for using the appliance, specific to Great Britain users.
General| Power | 2200 W |
|---|---|
| Capacity | 1.7 L |
| Material | Stainless steel |
| Water level indicator | Yes |
| Concealed heating element | Yes |
| Limescale filter | Yes |
| Keep warm function | No |
| Voltage | 220-240 V |
| Removable filter | Yes |
| Base | 360° base |
| Safety Features | Auto shut-off, Boil-dry protection |
To Next Page
