What to do if AEG FAVORIT 45003 Dishwasher does not fill with water?
If your AEG Dishwasher isn't filling with water, the water tap might be blocked or furred with limescale (clean it), the water tap might be closed (open it), the filter in the water inlet hose could be blocked (clean the filter), or the connection of the water inlet hose might be incorrect (ensure the connection is correct).
What to do if AEG FAVORIT 45003 dishes are not clean?
If the dishes in your AEG dishwasher aren't getting clean, it could be due to several reasons: the selected wash program may not be suitable for the load, the baskets might be loaded incorrectly preventing water from reaching all surfaces, the spray arms may not be turning freely because of incorrect loading, the filters could be dirty or incorrectly installed, or there might not be enough detergent.
What to do if AEG Dishwasher will not drain?
If your AEG Dishwasher won't drain, there could be a blockage in the sink spigot (clean the sink spigot), or the connection of the water drain hose may not be correct (make sure that the connection is correct).
Why AEG Dishwasher leaves dry water drop signs on glasses and dishes?
Dry water drop signs on glasses and dishes after using your AEG dishwasher may be resolved by increasing the rinse aid dosage. The detergent can also be the cause.
Why AEG FAVORIT 45003 leaves dishes wet and dull?
If your AEG Dishwasher leaves dishes wet and dull, it may be because no rinse aid has been used, or the rinse aid dispenser is empty.
Why AEG Dishwasher programme does not start?
The AEG Dishwasher program may not start because the appliance door isn't fully closed, the mains plug isn't properly connected, the fuse in your household fuse box has blown, or the delay start function is activated. To resolve this, ensure the door is closed, the mains plug is correctly inserted, replace the blown fuse, or cancel the delay start to begin the program immediately.
How to fix streaks, milky spots or a bluish coating on glasses and dishes after using AEG FAVORIT 45003 Dishwasher?
To fix streaks, milky spots, or a bluish coating on glasses and dishes after using your AEG Dishwasher, decrease the rinse aid dosage.
What to do if the anti-flood device operates on AEG FAVORIT 45003 Dishwasher?
If the anti-flood device operates on your AEG Dishwasher, close the water tap and contact your local Service Force Centre.
General safety guidelines, correct usage, and child safety precautions for the dishwasher.
Instructions for installing the dishwasher, including electrical and plumbing connections.
How to adjust the water softener based on local water hardness.
Instructions for filling and using dishwasher salt.
Guide to filling and adjusting the rinse aid dispenser.
Descriptions of fault codes and their potential causes and solutions.
Steps for installing the dishwasher under a worktop.
General| Type | Freestanding |
|---|---|
| Number of Place Settings | 12 |
| Drying System | Residual Heat |
| Drying Class | A |
| Drying Performance | A |
| Cleaning Performance | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Washing programs | Eco, Intensive, Quick |
To Next Page
