EasyManuals Logo

AEG FFB62620PW User Manual

AEG FFB62620PW
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
How to deactivate the rinse
aid empty notification
Make sure the appliance is in user mode.
1. Press Start.
The indicators , and
are off.
The indicator still
flashes.
The display shows the current
setting: = the rinse aid empty
notification is activated (factory
setting).
2. Press Start to change the setting.
= the rinse aid empty notification is
deactivated.
3. Press on/off to confirm the setting.
6.4 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Delay.
The indicators ,
and are off.
The indicator still flashes.
The display shows the current
setting: e.g. = level 4.
The levels of rinse aid range
from 0A to 6A where level 0A
means no rinse aid is used.
2. Press Delay repeatedly to change
the setting.
3. Press on/off to confirm the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
CAUTION!
In case of presence of
children, the AirDry system
can be deactivated if you
want to keep the door
closed in the end of the
cycle.
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Option.
The indicators ,
and are off.
The indicator
still
flashes.
The display shows the current
setting:
= AirDry activated.
2. Press Option to change the setting:
= AirDry deactivated.
3. Press on/off to confirm the setting.
www.aeg.com
10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG FFB62620PW and is the answer not in the manual?

AEG FFB62620PW Specifications

General IconGeneral
BrandAEG
ModelFFB62620PW
CategoryDishwasher
LanguageEnglish

Related product manuals