AEG FSE74607P - Basic Settings

Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number
code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
7. BASIC SETTINGS
You can configure the appliance by changing basic settings according to your needs.
You can also view the number of completed cycles and restore the factory defaults.
Number Setting Values
Description
1)
1 Water hardness 1L - 10L (default:
5L)
Adjust the level of the water softener according to the
water hardness in your area.
2 Rinse aid level 0A - 6A (default: 4A) Adjust the level of the rinse aid according to the nec‐
essary dosage.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal for the end
of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the buttons when
pressed.
6 Latest programme
selection
On
Off (default)
Enable or disable the automatic selection of the most
recently used programme and options.
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode.
When the appliance is in setting mode, the
bars of the ECOMETER represent available
settings. For each setting, a dedicated bar of
the ECOMETER flashes.
The order of the basic settings presented in
the table is also the order of the settings on
the ECOMETER:
1 2 3 4 5 6
7.1 Setting mode
How to navigate in setting mode
You can navigate in setting mode using
MY TIME selection bar.
BA C
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch between
the basic settings and to change their value.
ENGLISH 11