Settings Values Description
Water hardness 1 - 10 (default: 5) Adjust the level of the water softener accord‐
ing to the water hardness in your area.
1)
Rinse aid level 0 - 6 (default: 5) Adjust the level of the rinse aid according to
the necessary dosage.
1)
End sound ON
OFF (default)
Activate or deactivate the acoustic signal for
the end of a programme.
1)
Auto door open ON (default)
OFF
Activate or deactivate AirDry.
1)
Key tones ON (default)
OFF
Activate or deactivate the sound of the but‐
tons when pressed.
Latest prog. selec‐
tion
ON
OFF (default)
Enable or disable the automatic selection of
the most recently used programme and op‐
tions.
1)
Display on floor ON (default)
OFF
Activate or deactivate TimeBeam.
1)
Brightness 0 - 9 Adjust the brightness of the display.
Language List of languages
(default: English)
Set the preferred language.
Reset settings YES
NO
Reset the appliance to the factory settings.
The setting does not reset the wireless con‐
nection setup.
WiFi ON
OFF (default)
Activate or deactivate the wireless connec‐
tion.
2)
Network Signal strength
IP
MAC
Check the information about the network
connection.
Forget network YES
NO
Reset the network credentials.
2)
PNC number Number
Check the PNC number of your appliance.
1)
1)
For more details, refer to the information provided in this chapter.
2)
For more details, refer to the chapter "Wireless connection".
7.1 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
ENGLISH 13
To Next Page
Loading...
