When AirDry (空气对流干燥)
is activated during the
drying phase, the projection
on the floor may not be
completely visible. To check
the remaining time of the
running programme, look at
the control panel display.
4. CONTROL PANEL
1
On/off button
2
Navigation button (up)
3
Display
4
Option (选项) button
5
OK (确定) button
6
Navigation button (down)
4.1 Button behaviour
Navigation buttons (up and down)
• Use these buttons to scroll the lists
and information texts on the display.
Option (选项) button
• Short press to open the option list.
• Short press in the option list to return
to the programme list.
• Short press in the settings list to
return to the option list.
• Long press (3 sec.) when a delay start
or a programme is running to cancel
the delay start, the programme and
options. The display shows the default
programme: ECO 50° (节能 50°).
OK (确定) button
• Short press to confirm the selection of
the programme, options and settings.
• Long press (3 sec.) to start the
MyFavourite (常用程序) programme. If
no programme has been saved, the
display shows: Set MyFavourite (设置
常用程序).
5. PROGRAMMES
Programme Degree of soil
Type of load
Programme phases Options
ECO 50° (节能
50°)
1)
• Normal soil
• Crockery and cut-
lery
• Prewash
• Wash 50 °C
• Rinses
• Dry
• Extra Hygiene
• XtraDry (增强烘干)
ENGLISH 7
To Next Page
Loading...
