EasyManua.ls Logo

AEG FT 4925 - Page 6

AEG FT 4925
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
79
• Donotmeasurebodytemperaturewithin30minutesaftermeals,exer-
cise or bath.
• Thebodytemperaturemaybeincreasewhiletakingmedicine.
Please don´t measure.
• Inordertoensuretheaccuracyofmeasurementdata,pleasedon´ttake
measurement of body temperature in strong electromagnetic inter-
ference environment (such as microwave, high frequency equipment
operation environment, such as answering the phone).
• Whentheenvironmentchangesalot(forinstance,fromindoortoout-
door), please wait in the new environment for about 30 minutes before
measuring the new temperature.
• Theintervalsshallbe10secondswhenconstantmeasurementare
made. It is normal that there are deviations in constant measurement
between short intervals, in which case the average reading can be taken
as the result.
• Thereisnoabsolutelystandardvalueofbodytemperature.Forhealthy
persons the temperature can uctuate between 0.2 ~ 1°C (32.36 ~
33.8°F) in dierent areas of the body. Always measure the body tem-
perature at the same time of the day.
• Whentheenvironmentaltemperatureexceedsthefunctionaltempera-
ture range of the device, the device will show “Err“ symbol.
• Whenthetemperatureofthemeasuredislowerthan32.0°C,“Lo“
symbol will be displayed on the screen; when the temperature of the
measured is higher than 42.9°C, “Hi“ symbol will be displayed on the
screen.

Related product manuals