EN
Hazardous substances
Part Name Pb Hg Cd Cr6+ PBBs PBDEs
Mechanical structure
Working top (including glass ceramic/tempered glass/
stainless steel/enamelled steel, grids, pan supports,
hotplates, teppan yaki griddle plate and knobs)*
Heating elements (including burners, crowns, hotplates,
radiant heaters and induction coils) *
X
Gas pipe connection (including gas pipes, taps, injectors)*
X
Electric & electronic components (including spark
generators, ignition system, signal lamps, power board,
user interface and other electronic parts)*
X
Wiring & power cord
X
Fittings: brackets, gaskets, injectors & other parts needed
for installation as reported in the assembly instruction*
X
Notes:
1. This table is compiled according to SJ/T 11364-2014.
2.
means that this kind of hazardous substance content in all of the homogenous materials of this part is under the limitations
regulated in GB/T26572-2011.
3.
X
means that this kind of hazardous substance content in at least one homogenous material of this part exceeds the limitations
regulated in GB/T26572-2011.
4. For the parts with
X
in the above table, there is no replacement solution due to technological limitations in the industry, however, this
may change with technnological improvement.
5. If a part is marked with *, it means that it does not apply to all models, the actual parts depend on specifi c models.
6. Under normal usage conditions, the environment-friendly usage period is 10 years.
To Next Page
Loading...
