6.3 FlexiBridge Big Bridge mode
To activate the mode touch until you see
the correct mode indicator . This mode
connects three rear sections into one cooking
zone. The front section is not connected and
operates as a separate cooking zone. You
can set the heat setting for each zone
separately. Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the display shows and after 2 minutes the
zone switches off.
Incorrect cookware position:
6.4 FlexiBridge Max Bridge mode
To activate the mode touch until you see
the correct mode indicator . This mode
connects all sections into one cooking zone.
To set the heat setting use any of the two
control bars on the left side.
Correct cookware position:
To use this mode you have to place the
cookware on the four connected sections. If
you use cookware smaller than three
sections the display shows and after 2
minutes the zone switches off.
Incorrect cookware position:
ENGLISH 15
To Next Page
Loading...
